Dec.30 2008

I tried casting this afternoon. It's strange that the color of resin changed...but I like this white more than snow one.^^
And I'm lucky that the air bubbles in mold don't affect the resin parts.

I'm wondering why I am always experiencing those strange accidents.- -||| The god likes to kid me...



Dec.28 2008

It started to rain after my pump came back...
But the weather report said the weather would be fine after Monday.
I checked the mold I mentioned on Dec.17.
Not too bad. ^^ I will try cast on Tuesday.

My friend gave me some chocolates on Saturday.XD



Dec.25 2008

My vacuum pump came home today...

I will start to prepare big girls.

I didn't update a lot here...since I was used to write work diary at the end of a day, but now, it's too cold to sit before computer at night. @.@


Dec.21 2008

I'm quite free since my vacuum pump was down...
Then, I made clothes for Urami.^^

The pump will come back soon, I hope I can start cast work as soon as possible.><


Dec.17 2008

Bad news!

My vacuum pump went wrong this morning. It didn't work suddently, although it worked well just several seconds before its down. The last 300g silicone I poured into the mold has many air bubbles...


Have a close look...Oh!NOOOO! It cost me about 1500g silicone. If only the pump worked one more minute or even 30 seconds, the mold would be done. Now, I hope these air bubbles in the last 300g silicone don't affect too much, otherwise I have to redo the mold. That wastes time and silicone...


I phoned the shop at once. They told me it might because something plug inside pump. They will take my pump away tomorrow and clean it in the factory later. My pump will come back next Monday or Tuesday...

Just have to say...not too bad...if they can repair it. The repair fee is not as high as I've thought.

Hope everything go well later.


Dec.15 2008

I will make new molds tomorrow.><


Dec.12 2008

The improvement work on legs is nearly finished. I'm going to spend 2 days to sand them smooth, then, I will start to make new molds and cast dolls.^^

Japanese RIHO Doll Exhibition

I went to the exhibition with my friend on Tuesday. I took few photos since I think my aim is to remember them with my own eyes carefully.^^ And I've already seen beautiful photos taken by other visitors.

These two are my favorite.

Japanese RIHO Doll Exhibition

Japanese RIHO Doll Exhibition

Most dolls in exhibition are as tall as real human. I only have photos of legs...

Japanese RIHO Doll Exhibition

Japanese RIHO Doll Exhibition

I took Qiiro with me to exhibition, but I didn't let her out until we were in KFC.



Zombie babies No.4&5 twins Tenten will be released soon.^^



Dec.08 2008

I need to show some photos.><


This is what I'm doing these days. Adjust the legs...Hope you like them^^




Dec.02 2008

Maybe my soul is not in my body these days...

I will move attention on doll making tomorrow. ><


photos on my table

Pei Yi & Qiiro



Look old photos during working...
Then I find I still want a round-eyes girl.


Nov. 25

tiny complains ^^|||

I wanted to release my girls yesterday, so I took some photos for selling pages. Unfortunately, it's cloudy...My camera doesn't perform well in cloudy days. The photos were not as good as I expected.(TvT) I think they are even worse than these unformal photos.

The closer to releasing time, the more unconfident I become. It seems there are endless prepare work to do. I want to be perfect or just close to perfect, but everything tells me that there is no perfect.

I've designed some outfits for my girls, but just like women always think they need one more dress, I find I always need new materials...

My mother said, 'you should do everything one by one.'


Well, I'm going to finish per-order page today and release my girl. ^^


Nov. 23

continue update in my shop.^^


Nov. 22

It cost me one day to update the wigs in my shop. Please have a look at my shop><, I'm quite pleased with what I've done. ;)


Nov. 21

Take photos of wigs. @.@ I find there are many things to do before I released these girls, but, anyway, I will release them next week. ^^


The last 2 girls have been assembled

The last 2 girls have been assembled.

Mero. Old version Mero has black eyes and black hair, so I did some changes on this one. What's your opinion on this kind of eyes? My mother said it looks blind...

Pei Yi. I prefer black hair.


Qiiro's new eyes


I think this one is better...


more girls


I'm busy and lazy these days... Please come to my flickr to see more...



Qiiro on table ^^


Too much photos today, please come to my Flickr to see more.><


photos of Near and Qiiro

My Near. I nearly give up him, but he relived yesterday.^^

unformal photo of Qiiro.^^ I'm making clothes for her. The face up of the other four girls have been done, but I need to assemble them one by one...


Nov.11 2008

Paint face up for my big girls.^^
I need to assemble them later.



not the final formal photos.><



Nov.9 2008

Paint face up.

Here are 2 photos taken on Nov. 3.
I casted a radom head mold and got a Qiiro. She is the first strung girl.

The problem of resin I mentioned.


Nov.6 2008

prepare tiny dolls ^^

p.s to pixie,
I can't send emails to you. My mail is returned.- -|||


Nov.4 2008

My nose is painful after wearing gas mask for a long time in the past 3 days. (-///-)

I have a good news. The problem of resin is solved, I think.^^

I asked the seller about the problem. He thought it's not usual that the resin went bad so fast. He
opened cans of resin in raining days, but there was no such big affect as I met. He mentioned he saw similar problem as my description when he mixed excessive part B.

I didn't add excessive part B, but I think maybe I can try to reduce part B a little.

In normal condition, the scale is 1:1. Therefore, I changed it to 1:0.955 yesterday. But it didn't work well either. Then, I gave up dying, try the pure resin. It seems it has some effects. I cast 3 girl with the residual white resin, because I didn't want the resin becomes worse. I was happy that I used out this set of resin and could have a rest from casting.

Then, a new problem rose. I need to cast tiny dolls in dark and tan skin color for someone as soon as possible. After a short struggle in this morning, I decided to open a new set of resin, since the weather report says it will be raining in the following days and today is the only fine day. I think it's better to cast these tiny dolls first, no matter if the resin goes bad later, than to let others wait more time for their ordered tinies.

However, I was shocked when I found new resin had the same problem as the last one. At that time, I nearly collapsed... but a few minutes later, I had to tidy up my broken heart, try to reduce scale of part B to 1:0.94. This time God bless me...It works.

Now I just need to use out this set of resin ( to cast 4 girls tomorrow) as soon as possible. ^^||||

Hope all things are OK.><


Nov.2 2008

I'm very very very sad today. It seems the resin I opened yesterday went bad...
I know it will become bad soon in raining days, but I don't know it turns bad so fast...

I was casting all day, but got only miscasts... I will try again tomorrow, but I don't expect too much.

Well, I have to wait a fine day to continue my casting work with a new set of resin. The weather report says it will continue raining.



Nov.1 2008

I just can't wait to cast them...though it's wet today.

I use white resin, please take reference from the color of body.>< DSCN3377
I have progress on mold making.^^ The molds of body are quite successful.

She is very different with old version Lii...

Pei Yi. I hate impurities. TvT

The left one is the first cast. I estimated less resin than needed, so there is a big hole...(TvT)

A big hole!

Urami. The first cast always has many impurities.

I like this side of her face.

Mero. Every time I see Mero without face up, I will think of Goblin...

Qiiro. She is a quiet girl.^^

I will cast ordered tiny dolls tomorrow...orz


Oct. 31 2008

The last mold, Qiiro head cost more time than I've expected. This time, the silicone solidified too slowly, so about 1/5 silicone leaked... I had to add more silicone and wait it solidifies.

I will start to cast when it stops raining.


Oct.29 2008

All molds will be done tomorrow.^^
I'm busy these days, so can't talk too much here.><


Oct.27 2008

I started to make molds today.

An accident happened in the morning... The silicone solidified too fast, because it has been unsealed for several months. - -||| Poor Pei Yi was buried in silicone with many air bubbles. Well...I have to put her aside and wait silicone solidifed totally so that I can take her out.

Then, I turned to Hexad Lii head. I opened a new can of silicone. This mold is successful.

Next, I prepared for arms and feet mold. I will fill it with silicone tomorrow.

The bistouries I bought yesterday arrived in late afternoon. I resuced Pei Yi from silicone by bistoury. ^^


Oct.26 2008


New clothes I bought for my Lii~

Prepare molds of girls.><


photos Oct. 23

My tan tiny Hexad finally got clothes for her. (Kelly's clothes and Jenny's cap.)

Tiny Neara still needs more clothes...

'You stole my wig!'
'No, I did nothing...'

'Do you wanna some cookies?'


Oct. 23 2008

I will end my sanding work on Oct.25.^^

I took some photos of my tan tiny Hexad, tiny Neara, tan tiny Riko, but it's too late. I have no time to deal with photos. I will post them tomorrow.^^


Oct. 22 2008

Continue sanding...
They will be completed soon.><

I bought some cloth to make new dress for these girls. I've stocked dozens of cloth, but it's strange that what I want is always in other's shop...- -|||


meaning of fairygarden

Why I call here 'garden'?

My friend and I were interested in flowers when we were in middle school. We bought many seeds from markets, but I got only mimosa at last...- - Because I hadn't a good place for flowers. I lived on 4th floor and there was only a public balcony, which was face to the north...

One day, when we passed by a small garden full with blooming flowers in the nearby college, I said to my friend, I hope I could own a small piece of land like that so that I can plant as many flowers as I can and they will certainly grow well.

It's a beautiful dream and an improssible dream. As I grow up, I know we can't own lands. Lands are 'pubilc'.

Thank God! I finally own a tiny space on Internet. When considering a name for my space, it reminded me the dream of a garden. >w<><

Oct. 20 2008

Sanding ^^|||


Oct. 19 2008

I'm feeling guilty that my plans are not achieved every time. (TvT)

It's already Oct. 19, but it seems I need more time to sand them. The sanding work is really very boring. I became impatient. I love sculpting, painting face up and making clothes for dolls, but I don't like sanding, making molds and casting.(>w<) However, another voice in my mind told me to keep calm, if I don't sand them smooth, I will certainly regret in the future, just as what I've done with Near.

...anyway, they're more and more close to be completed.

Today, photos of Mero.
I found I didn't take many photos for her. I spent least time on her in five girls.

After I finish sanding work and molds, I will cast some per order tiny dolls first. Then, cast big girls. When I use out a set of resin, I will stop casting work for a while to prepare ordered tiny dolls first. Then, I have time to assemle my big girls, to paint face up and to make clothes for them. I can accept per order of them at that time...